Product Detailed Classification

Dec 21st 2024

Our products can be divided into four kinds according to the principle of magnetic generation: electro permanent magnetic type(EPM), electro magnetic type(EM), permanent magnetic type(PM). And non magnetic type, Vacuum chuck.

EPM chucks/tables. Magnetism is produced by permanent magnet materials, but some permanent magnets can be demagnetized by changing the magnetic poles with an electric current. includes the following products:
Electro Permanent Magnetic Chuck
Grid Pole Round Electro Permanent Magnet
Electro Permanent Magnetic Grinding Plate
Radial Pole Round Electro Permanent Magnetic Chuck

EM chucks/tables have a large number of copper coils inside, which generate magnetism by electromagnetic induction after being energized. EM chucks/tables require a continuous supply of electricity to operate, and the magnetism disappears when the electricity is interrupted.
Electromagnetic Plate
Rotary Electromagnetic Chuck
Round Electro Magnetic Plate

PM chucks/tables have permanent magnetic material inside, and the magnetization and demagnetization is achieved by moving the position of the permanent magnetic material with a wrench. So all PM chucks/tables are manual.
Fine Pole Permanent Magnetic Chuck
Magnetic Sine Plate
Parallel Pole Permanent Magnetic Milling Chuck
Round Permanent Magnetic Chuck (Parallel Pole)
Grid Permanent Magnetic Table
Round Permanent Magnetic Table (Radial Pole)

Vacuum chuck/table is for non-magnetic materials clamping
Multi Holes Vacuum Table
Grid Vacuum Table

The following are classified according to the type of processing